:: VIBRATORY TUBS
MODEL SVP 5 MAXIMUM CAPACITY
5 Cu. Ft.
Unit: 35-1/14”H x 23”W x 52-1/2”L
Tub: 15-5/8”D x 15-1/4”W x 44-1/2”L
Lining: 5/8” Urethane
Power: 230/460V, 1-1/2HP, 2700
Sound Insulating and sound cover
RPM, 3 Phase Weight: 730 lbs
Shown with optional dividers installed.
High Quality • Portable • Quiet
Shown with optional dividers installed
SVP 5
$7,335
MODEL SVP 2.5 MAXIMUM CAPACITY
2-1/2 Cu. Ft. Unit:
35-1/2”H x 22-1/2”Wx27”L
Tub: 15-3/4”D x 15-1/2”W x 19 3/4”L
Lining: 1/2” Urethane
Power: 110V, 1HP, 2700 RPM
Timer: 0-1 Hour or 0-12 Hour (both with hold feature) Sound Insulating and sound cover
Heavy duty locking casters.
Weight: 350 lbs
Shown with top sound cover.
High Quality • Portable • Quiet
Shown with top sound cover
SVP 2.5
$3,995
BOTH MACHINES ARE AVAILABLE IN SINGLE OR THREE PHASE
BOTH MACHINES• 5’ round discharge door with discharge trough
• Heavy gauge steel construction coated with rust preventive enamel paint
• Sound reduction cover and anchor bolts
• Polyurethane liner made from the finest quality material available and oven cured
• Complete fluid circulation system including pump, fluid container, all necessary hoses and fittings.
MODEL 300DB AVAILABLE IN SINGLE OR THREE PHASE
MODEL 300DB
• Inside tank dimensions: Length 31” Depth 13”, Width 13-1/2
• Motor: 1HP, Single Phase, 110 Volts, or 220 Volts
• Weight: 400 lbs.
300DB,3 Cu.Ft.
$2,300
MODEL 600DB AVAILABLE IN SINGLE OR THREE PHASE
• Inside tank dimensions: Length 35” Depth 18-3/4”
• Width 18 Motor: 3HP, Three Phase, 230 Volts, or 440 Volts
• Weigh: 700 lbs.
600DB,6.5 Cu.Ft.
$4,240
For more aggressive deburring applications
From wing spars for mammoth aircraft to small parts that can be finished by the thousands in a single load, this uniquely flexible method produces exceptionally fine results - particularly in processing parts with blind or recessed areas. The machine’s variable speed and adjustable eccentric weights can be closely adjusted to vary the vibratory forces to exacting degrees.
BATCH VIBRATORY UNITS
Systems for High Production Precision Deburring and Finishing
Thru-feed machines are integrated with material handling systems including an oscillating parts-media separator, incorporating a secondary “fines” removal deck and a media return conveyor - for complete automatic processing of high production parts. Parts may be fed into the machine at short intervals, direct from preceding operations. Systems are ideally suited for incorporating washer, dryer, or rust- inhibiting operations. These systems are specifically designed for processing parts on a thru-feed basis, requiring process cycles of from 3 to 20 minutes, depending on part size and finishing demands.