:: POLISHING, BUFFING, and DEBURRING
OD-2 CYLINDRICAL FINISHER
UP TO 9" DIA. Abrasive Belt and flexible wheel.
Outside diameter cylindrical finisher for outside diameter surface improvement of shafts, tubes, rods and other round parts. The OD-2 operates on the Centerless principle and is designed for simple set-up and operation. It's designed to Buff, Brush, or Polish using a wide variety of medias and features:
* Construction — Cast Iron base and head components
* Part capacity — 0 to 2" diameter parts
* Feed rates — Variable 0 to 55 feet per minute
* Spindle Drive — 5 or 7 1/2 HP
* Spindle arbor size — 1 1/4"
* Spindle wheel size — 12" diameter x 4" or 6" face
* Regulating head style — Floating pivot
* Regulating head drive — DC variable speed
* Regulating roll size — 6" diameter x 4" or 6" face
* Regulating head angle — 0 to 15 degrees
* Work rest blade — 6" long carbide, nylon, or felt
* Height from floor to work — 39"
* Floor space required — 51" x 68"
* Weight — 1550 pounds
OD Parts FinisherOPTIONS AVAILABLE
* Both wet and dry processing configurations
* Abrasive belt unit with air tensioning
(4" wide x 90 " long)
* Part guides
* Electronic wheel wear compensation
* Automatic compound application
* Automatic feeding systems
* Automatic reversing regulating head
* Automatic transfer between machines
* Monorail fixturing for complex parts
* Dust collection
* Filtered Recirculation of coolant
* Construction — Cast Iron base and head components
* Part capacity — 0 to 2" diameter parts
* Feed rates — Variable 0 to 55 feet per minute
* Spindle Drive — 5 or 7 1/2 HP
* Spindle arbor size — 1 1/4"
* Spindle wheel size — 12" diameter x 4" or 6" face
* Regulating head style — Floating pivot
* Regulating head drive — DC variable speed
* Regulating roll size — 6" diameter x 4" or 6" face
* Regulating head angle — 0 to 15 degrees
* Work rest blade — 6" long carbide, nylon, or felt
* Height from floor to work — 39"
* Floor space required — 51" x 68"
* Weight — 1550 pounds
OD Parts FinisherOPTIONS AVAILABLE
* Both wet and dry processing configurations
* Abrasive belt unit with air tensioning
(4" wide x 90 " long)
* Part guides
* Electronic wheel wear compensation
* Automatic compound application
* Automatic feeding systems
* Automatic reversing regulating head
* Automatic transfer between machines
* Monorail fixturing for complex parts
* Dust collection
* Filtered Recirculation of coolant
LATHE MOUNTED POLISHERS
Model: 3 H.P.
$3,265
THE BT 25 CYLINDRICAL DEBURRING AND FINISHING SYSTEM
Typical Component Parts
Standard Features
• 110 volt, single phase electrics
• 1 HP spindle motor with 1" spindle
• 1/4 HP drive motor
• Variable speed through-put, up to 20 FPM
• Handwheel height $ pressure adjustment
• Amp meter
• Adjustable side support for for shoulder polishing
• UHMW guide blades
• Two (2) dust collection pickups
• Accomodates 2,"8, 10" X 12" diameter wheels
Optional Equipment
• Pop-up head for selective polishing
• 110 volt, single phase electrics
• 1 HP spindle motor with 1" spindle
• 1/4 HP drive motor
• Variable speed through-put, up to 20 FPM
• Handwheel height $ pressure adjustment
• Amp meter
• Adjustable side support for for shoulder polishing
• UHMW guide blades
• Two (2) dust collection pickups
• Accomodates 2,"8, 10" X 12" diameter wheels
Optional Equipment
• Pop-up head for selective polishing
The BT 25 is a portable bench top machine for light-duty applications as found in job shops, small businesses, and a variety of light manufacturing environments.
Model: BT 25 DRY
$7,490
THE BT 50 CYLINDRICAL DEBURRING AND FINISHING SYSTEM
The BH 50 is a centerless, outside diameter finishing machine used in many diverse applications. Available in wet or dry configurations with single or multiple heads.
Typical Component Parts
Standard Features
• 5 HP spindle motor with 1-1/4" spindle
• 1/3 HP drive motor with variable speeds up to 30 FPM
• Handwheel height & pressure adjustment
• Easy to use push button controls
• Amp meter
• Handwheel adjusted belt tracking
• UHMW guide blades
• Two (2) dust collection pickups
• Accomodates 4" X 12" diameter wheels & 4" X 90"
abrasive belts
• Safety interlocks & E-Stop
• Made In USA
Optional Equipment
• Pop-up head with foot pedal control
• Handwheel adjusted guide blades
• Spring-loaded hold down rollers
• Manual & automatic lubrication systems
• Buffing compound applicator
