:: PEDESTAL SANDERS
2FSM 2” SANDER MULTI-POSITION VERTICALOR HORIZONTAL
2” x 48” belt. Vertical or Horizontal Position.
1/2 HP motor, 3450 RPM, direct drive, 5” contact wheel
Tilt work table, removable platen
Full hinged OSHA guard for quick belt charge.
Pre-set belt tension, one knob belt tracking
4500 SFPM belt speed, WT. 48 lbs.
Model: 2FSM
Model: 2FSM
$399
1SM 1” BELT SANDERL
1/3 HP Motor
1 PH. 1725 RPM
1” x 42” belt
4” contact wheel
Tilt table - vertical sander only
1800 SFPM
32 lbs
Model: SM1
$240
S4S
All-purpose for wood, metal and plastics.
1/2 HP, 1 phase (1 HP available, #S4S-1)
Vertical or horizontal position.
3450 RPM
4” x 36” Belt with
Full OSHA Guards
Model: S4S
$595
S6MS, 6” BELT SANDER
Industry standard. 3 HP!! Real workhorse!! Every shop needs one!!
Also available in 5 HP and in 6” x 60” belt!
6” x 48” belt, variable positions, direct drive, 1 lever quick belt release!!!
Cast iron frame. Full OSHA safety guard. Heavy duty steel stand.
3 HP motor 3450 RPM. 1 phase or 3 phase, manual switch.
3500 SFPM Reversible platen 6 1/2” x14” Cast iron work table 6” x 10” with 1/2” x 1/8” slot
$1,195 - Model: S6M-1 3hp, 1 phase, 220, LESS stand
$1,195 - Model: S6M-3 sander, 3 hp, 3 phase, LESS stand
$1,349 - Model: S6MS-1, 3 hp, 1 phase, 220 volt, w/Stand
(110 volts @ 34 amps.)
$1,349 - Model: S6Ms-3, 3 hp, 3 phase, 220/440 volt, w/Stand
Model: S6MS
BG272, 2” BELT GRINDER
Open area design for easy access. 2” x 72” belt
Throat dimensions: H 10” x D 13”
Dimensions: L 24” x W 12” x H 24”
7200 SFPM belt speed, 5” lower
contact wheel, direct drive.
Easy belt tracking
1 HP TEFC, 1PH
(110/220V) monitor. Manual
switch, Wt: 80 lbs.
Model: BG272
$1,395
:: MULTI-PURPOSE BELT GRINDER
MODEL S272V
One machine for:
• Grinding • Shaping • Contouring
• Flat work • Angles • Snagging• Roughing
• Versatile – quick change contact
wheel (3" and 1-1/2") with various
angles. Easy to change.
• L 27" x W 18" x H 40".
• SFPM 5400.
• 2" x 72" belt.
Platen rotates
360° for many
different shapes of
sanding.
$1,295 - MODEL S272 2" X 72" belt grinder. Bench model, 1 HP. 1 PH or 3 PH, please specify. Manual switch. Wt. 110 lbs.
$1,449 - MODEL S272S. Same as above but with heavy-duty stand legs. Wt. 170 lbs.
$2,290 - MODEL S272V. Same as S272 only mounted on DCV-6 dust collector. Wt. 350 lbs.
MODEL S272V
:: 6" X 90" BELT GRINDER
MODEL KS690HV
• 6"w x 8" diameter 70 duro serrated contact wheel.
• 6" x 24" platen for flat work.
• 7200 SFPM.
• 400 CFM vacuum base.
• Air belt tension.
• Manual switch.
• Spark chute horizontal/vertical.
• Dimensions —W 18" x D 26" x H 42".
MODEL KS690 5 HP, 3PH TEFC motor, 220 or 440 volt (please specify). No vacuum base. Wt. 400 lbs.
MODEL KS690HV 5 HP, 3PH TEFC motor, 220 or 440 volt (please specify). Vacuum base. Wt. 600 lbs.
MODEL KS690
$4,475
MODEL KS690HV
$4,475
:: INDUSTRIAL ABRASIVE BELT SANDERS
